SC130EV Economical and practical electric excavator
Double the Energy Efficiency, and Zero Emissions
Compared with the diesel engine power system, it saves 50% energy in the same working condition, and is environmentally friendly, electrically driven, with zero emission and low working noise.
Maintenance-free With 50% Cost
No oil, diesel or air filters, with the powertrain only needs to be greased every 2000 hours for the motor bearings.
Multiple Purposes for Various Working Conditions
The radius of working movement can be designed according to 50m-100m, with supporting power supply facilities of overhead line and trailing line available, which can meet different working conditions according to different scenarios; in addition, it can meet the needs of construction under various working conditions by replacing the fittings.
Key Components
1. Main motor: It adopts imported bearings and independent axial flow fan with reliable structure and easy maintenance.
2. Electric control cabinet: it adopts 4-pole leakage protection device, which is equivalent to the protection of new energy vehicles, making it safer.
3. Central collector: a staging area for the upper frame and lower frame circuits, which effectively avoids short-circuiting and tangling of wires.
4. Hydraulic system: it is equipped with high power hydraulic pump, with high work efficiency, and can be equipped with crushing hammer.
Application Scenarios:
|
Technical specifications |
parameters |
| Working quality（T） |
13 |
| bucket capacity(m3) |
0.53-0.65 |
| Motor model |
YE3-225S-4 VF1 |
| Power (kw/r/min) |
37/1480 |
| Rated voltage（v） |
380 |
| Walking speed (high/low)(km/h) |
5.3/3.1 |
| Swing speed(r/min) |
12.6 |
| Climbing ability(°) |
35 |
| Bucket excavation force(KN) ISO |
80 |
| Arm digging force (KN) ISO |
64 |
| Ground specific voltage (KPa) |
38 |
| Traction force （kN) |
86 |
| Hydraulic pump model |
K3V63DT |
| Max displacement（L/min) |
128*2 |
| Working pressure (MPa) |
34.3 |
| Hydraulic tank volume (L) |
130 |
| A - Total length (mm) |
7576 |
| B - Overall width (mm) |
2490 |
| C-total height (boom top) (mm) |
2780 |
| D-Overall height (top of cab) (mm) |
2813 |
| E-counterweight ground clearance (mm) |
870 |
| F - Minimum ground clearance (mm) |
433 |
| G-Tail turning radius (mm) |
2015 |
| H - Track grounding length (mm) |
2750 |
| J-Track length (mm) |
3480 |
| K-Rail guage (mm) |
1960 |
| L-Track width (mm) |
2460 |
| M - Track shoe width (mm) |
500 |
| N-Turntable width (mm) |
2490 |
| O - Maximum excavation height (mm) |
8630 |
| P - Maximum unloading height (mm) |
6180 |
| Q - Maximum excavation depth (mm) |
5501 |
| R-Maximum vertical wall excavation depth(mm) |
4940 |
| S-Maximum excavation distance of 2.5m horizontal surface(mm) |
5287 |
| T - Maximum excavation distance (mm) |
8309 |
| U - Maximum excavation distance on the ground (mm) |
8180 |
| V - Minimum turning radius (mm) |
2495 |
| W - Maximum height at minimum turning radius (mm) |
6433 |
| X - Distance from the center of rotation to the rear end (mm) |
2015 |
| Y - Track tooth thickness (mm) |
25 |
| Z-Counterweight height (mm) |
1935 |
| A1- Grounding length (during transportation) (mm) |
4402 |
| Arm length(mm) |
2500 |
| Boom length(mm) |
4600 |
Note: As products are constantly upgraded, Lishide will modify and adjust the product technical parameters, configuration and other information at any time without notice; therefore, this information is for reference only, and the product configuration, appearance, technical parameters, etc. shall prevail in kind.