SC240.10ES (fuel-electric hybrid energy-saving excavator)
Dual Power, and Strong Adaptation
It is equipped with 140KW motor and 129KW diesel engine, which can be switched flexibly. Its high power engine is powerful, safe and reliable.
Stable Hydraulics, and Accurate Control
Negative flow control, deep tuning, precise power matching.
Solid Structure, and Better Craftsmanship
High-strength materials are used, with cast steel or cast iron parts in key areas.
Energy Saving and Environmental Protection
Purely electric mode is adopted, with energy saving of more than 50%.
Reduced Costs and Increased Efficiency
Instead of electronic control cabinets and inverters, it uses all-in-one controllers to reduce costs and increase efficiency.
Central Collector
A centralized collector is added as a transfer station for the upper and lower frame circuits, which can effectively avoid short-circuiting and tangling of wires, and provide better safety.
| Technical specifications | parameters |
| Working quality（T） | 24.6 |
| bucket capacity(m3) | 1.2-1.4 |
| Motor model | Dongkang B5.9/WR510 |
| Power (kw/r/min) | 129/2200 140/1900 |
| Fuel tank volume（L） | 400 |
| Walking speed (high/low)(km/h) | 5.93/3.68 |
| Swing speed(r/min) | 12.9 |
| Climbing ability(°) | 35 |
| Bucket excavation force(KN) ISO | 159 |
| Arm digging force (KN) ISO | 115 |
| Ground specific voltage (KPa) | 51 |
| Traction force （kN) | 220 |
| Hydraulic pump model | AP4VO140 |
| Max displacement（L/min) | 280*2 |
| Working pressure (MPa) | 34.3 |
| Hydraulic tank volume (L) | 260 |
| A - Total length (mm) | 10055 |
| B - Overall width (mm) | 2980 |
| C-total height (boom top) (mm) | 3180 |
| D-Overall height (top of cab) (mm) | 3070 |
| E-counterweight ground clearance (mm) | 1050 |
| F - Minimum ground clearance (mm) | 442 |
| G-Tail turning radius (mm) | 3088 |
| H - Track grounding length (mm) | 3635 |
| J-Track length (mm) | 4440 |
| K-Rail guage (mm) | 2380 |
| L-Track width (mm) | 2980 |
| M - Track shoe width (mm) | 600 |
| N-Turntable width (mm) | 2800 |
| O - Maximum excavation height (mm) | 9610 |
| P - Maximum unloading height (mm) | 6695 |
| Q - Maximum excavation depth (mm) | 6860 |
| T - Maximum excavation distance (mm) | 10175 |
| U - Maximum excavation distance on the ground (mm) | 9995 |
| V - Minimum turning radius (mm) | 3780 |
| W - Maximum height at minimum turning radius (mm) | 7910 |
| X - Distance from the center of rotation to the rear end (mm) | 3088 |
| Y - Track tooth thickness (mm) | 26 |
| Z-Counterweight height (mm) | 2120 |
| A1- Grounding length (during transportation) (mm) | 5245 |
| Arm length(mm) | 3050 |
| Boom length(mm) | 5850 |
Note: As products are constantly upgraded, Lishide will modify and adjust the product technical parameters, configuration and other information at any time without notice; therefore, this information is for reference only, and the product configuration, appearance, technical parameters, etc. shall prevail in kind.