SC360EV Electric Excavator
Double the Energy Efficiency, with Minimum Emissions
The output efficiency of SC360EV's main motor is over 92.1%, which meets the E3 (Ultra High Efficiency) standard and more than doubles the less than 40% of traditional fuel engines. With the synergistic control of electric drive and hydraulic system, it is faster in action, stronger in power, and more efficient in energy saving; compared with the fuel model, SC360EV can realize zero emission and reduce the noise level by 12 decibels, which is more environmentally friendly;
Maintenance-free With 50% Cost
SC360EV adopts electric drive, with the cost of electricity lower than that of fuel by more than 50% under the same working conditions, and can extend the service life of the whole machine; it has no three filters (oil, diesel and air), which is free of maintenance and replacement; and the power system only needs to replenish grease for the motor bearings once every 2,000 hours;
Multiple Purposes for Various Working Conditions
Fittings can be changed to meet the relatively fixed construction sites.
Main pump features: the latest technology is adopted, with higher efficiency, increased bearing and journal capacity, enhancing product reliability.
Application Scenarios:
Technical specifications | parameters |
Working quality(T) | 36 |
bucket capacity(m3) | 1.8-2.0 |
Motor model | YVF315L2-4 |
Power (kw/r/min) | 200/1800 |
Rated voltage/frequency(V/Hz) | 380/50 |
Walking speed (high/low)(km/h) | 6.8/4.2 |
Swing speed(r/min) | 9.7 |
Climbing ability(°) | 35 |
Bucket excavation force(KN) ISO | 208/228 |
Arm digging force (KN) ISO | 135/147 |
Ground specific voltage (KPa) | 70 |
Traction force (kN) | 264 |
Hydraulic pump model | AP4VO200 |
Max displacement(L/min) | 351*2 |
Working pressure (MPa) | 31.4/34.3 |
Hydraulic tank volume (L) | 310 |
A - Total length (mm) | 13235 |
B - Overall width (mm) | 3190 |
C-total height (boom top) (mm) | 3445 |
D-Overall height (top of cab) (mm) | 3278 |
E-counterweight ground clearance (mm) | 1207 |
F - Minimum ground clearance (mm) | 498 |
G-Tail turning radius (mm) | 3418 |
H - Track grounding length (mm) | 4030 |
J-Track length (mm) | 4945 |
K-Rail guage (mm) | 2590 |
L-Track width (mm) | 3190 |
M - Track shoe width (mm) | 600 |
N-Turntable width (mm) | 2995 |
O - Maximum excavation height (mm) | 10705 |
P - Maximum unloading height (mm) | 7649 |
Q - Maximum excavation depth (mm) | 8304 |
R-Maximum vertical wall excavation depth(mm) | 7289 |
S-Maximum excavation distance of 2.5m horizontal surface(mm) | 8148 |
T - Maximum excavation distance (mm) | 12066 |
U - Maximum excavation distance on the ground (mm) | 11892 |
V - Minimum turning radius (mm) | 4631 |
W - Maximum height at minimum turning radius (mm) | 8852 |
X - Distance from the center of rotation to the rear end (mm) | 3418 |
Y - Track tooth thickness (mm) | 30 |
Z-Counterweight height (mm) | 2265 |
A1- Grounding length (during transportation) (mm) | 6133 |
Arm length(mm) | 3686 |
Boom length(mm) | 6970 |
Note: As products are constantly upgraded, Lishide will modify and adjust the product technical parameters, configuration and other information at any time without notice; therefore, this information is for reference only, and the product configuration, appearance, technical parameters, etc. shall prevail in kind.