SC485EV Electric Excavator
Energy saving and consumption reduction
With electric power drive, the cost of electricity is more than 50% lower than the use of fuel under the same operating conditions, and it extends the service life of the whole machine with lower maintenance cost. It provides energy through a connecting cable and does not need to be fueled.
Savings in Maintenance Costs
The use of electric motors eliminates the need to change the three filters and oil of diesel engines, and only requires the main motor bearings to be replenished with grease every 2,000 hours.
Environmental Protection
Overcoming the environmental pollution caused by the exhaust of the internal combustion engine under the working conditions, it has zero emission and required no maintenance, while reducing the working noise. The noise is 10dB lower than that of the same type of excavator, which is more environmentally friendly.
Flexible Replacement of Fittings Enables Multi-Purpose Uses.
By replacing the fittings, it can meet the needs of construction in various working conditions. At present, customers are equipped with fittings such as steel grabbers, grass grabbers, hydraulic shears etc.
Applicable working conditions
Electric excavators are suitable for working conditions where the power connection is convenient and the moving distance is small, such as river docks, recycling companies, steel mills, power plants, mines etc.
Technical specifications | parameters |
Working quality(T) | 48 |
bucket capacity(m3) | 2.8-3.0 |
Motor model | YVF315L2-4 |
Power (kw/r/min) | 200/1800 |
Rated voltage/frequency(V/Hz) | 380/50 |
Walking speed (high/low)(km/h) | 4/2.3 |
Swing speed(r/min) | 7.5 |
Climbing ability(°) | 35 |
Bucket excavation force(KN) ISO | 256 |
Arm digging force (KN) ISO | 212 |
Ground specific voltage (KPa) | 88.5 |
Traction force (kN) | 404 |
Hydraulic pump model | K5V200TH |
Max displacement(L/min) | 300*2+22.5 |
Working pressure (MPa) | 34.3 |
Hydraulic tank volume (L) | 360 |
A - Total length (mm) | 12180 |
B - Overall width (mm) | 3340 |
C-total height (boom top) (mm) | 3640 |
D-Overall height (top of cab) (mm) | 3280 |
E-counterweight ground clearance (mm) | 1300 |
F - Minimum ground clearance (mm) | 722 |
G-Tail turning radius (mm) | 3845 |
H - Track grounding length (mm) | 4378 |
J-Track length (mm) | 5390 |
K-Rail guage (mm) | 2740 |
L-Track width (mm) | 3340 |
M - Track shoe width (mm) | 600 |
N-Turntable width (mm) | 3045 |
O - Maximum excavation height (mm) | 10880 |
P - Maximum unloading height (mm) | 7605 |
Q - Maximum excavation depth (mm) | 7758 |
T - Maximum excavation distance (mm) | 11970 |
U - Maximum excavation distance on the ground (mm) | 11815 |
V - Minimum turning radius (mm) | 4825 |
W - Maximum height at minimum turning radius (mm) | 9250 |
X - Distance from the center of rotation to the rear end (mm) | 3845 |
Y - Track tooth thickness (mm) | 36 |
Z-Counterweight height (mm) | 2835 |
A1- Grounding length (during transportation) (mm) | 6650 |
Arm length(mm) | 3380 |
Boom length(mm) | 7060 |
Note: As products are constantly upgraded, Lishide will modify and adjust the product technical parameters, configuration and other information at any time without notice; therefore, this information is for reference only, and the product configuration, appearance, technical parameters, etc. shall prevail in kind.